pool circulation

The importance of pool circulation


Circulation is the first and most important step in caring for your pool. When you circulate your pool, you filter and clean your water. It also helps spread chemicals through the water, just like the sugar in your cup of tea. Without proper and efficient circulation, impurities and bacteria can build up, leaving your pool cloudy and dirty. When you have good circulation in your pool, it will not only keep your water clean, it will also decrease the amount of pool cleaning you will need to do and will also significantly reduce the number of chemicals needed.

What makes for good pool circulation?

Every swimming pool, regardless of size, should have a decent pump and filter. When the water is circulating, it is done by your pump. When the pump is running it draws water from your pool through the skimmer, once the water is drawn in by the pump it then passes through your pump and into the filter. The main purpose of filters is to ensure that the water becomes clean by removing particles that dirty your water. Once the water has been cleaned by the filter it is then pushed back into the pool using a jet, you will find that some pools have more than one jet.

How to improve the circulation of your swimming pool?

A handy tip to keep your pool flowing smoothly is to make sure the jet is placed in a direction that spins the water through the pool. A good idea would be to point your jet in the opposite direction of the skimmer, this will circulate the water efficiently and ensure the water is mixed from the bottom up.

Hard to reach areas

You will find that no matter how good a pump or filter you buy, there will always be areas that seem impossible to clean. Some of these areas include behind the pool ladder, around the pool steps, and anywhere there might be cracks and creases. Some of these areas are just unavoidable, you can aim the jets in the direction as much as possible, but most of the time they will need a little elbow grease to clean them with a brush of swimming pool.

It is important to know the turnover rate of your pool

When you talk about a “turnover” rate for your pool, it means the time it takes to circulate your pool water through the filtration system. When it comes to a home pool it’s not that important to know the exact duration, the general rule of thumb is to allow your pool pump to run for 8-10 hours a day. The pool pump does all the work for you and is the most important part of the circulation process, the key things you need to remember are as follows.

Negative effects of poor circulation

When you think about your pool circulation it is very similar to your own body, if you have poor circulation you will feel unwell, uncomfortable and it can lead to serious health issues. If your pool lacks the proper maintenance and poor water circulation, it can lead to serious problems for your pool. Improperly circulated water, in turn, will not allow sanitizing chemicals to spread through the water, which means your pool will not be clean and clear and the end result could mean your pool will become cloudy. , green and dirty.

There are so many reasons why it’s important to be on top of your pool maintenance, checking your pool’s water circulation should be the number one priority when following a pool maintenance schedule. . Remember that dirty filters mean slower flow, always check your pool filter regularly, always clean your pool basket and make sure your pool valves are always open.

You want to get started in the construction of swimming pools, our swimming pool company TunisĀ  is a specialist in the construction of your swimming pool project.

Related Posts

Leave a Reply

Your email address will not be published. Required fields are marked *